During machining operations, cooling of the machining site is very important, as it effectively prevents, thereby improving the surface quality and increasing tool life. However, the loobricoolant which is necessary for cooling cannot always be guided directly from the outside to the machining site. This may be the case, for instance, if the required space is not available or if the production process does not permit it.
In such cases, good cooling may be achieved by transporting the lubricoolant in the grinding wheel pores to the grinding site. Your lubricoolant specialists from the Grindaix team have developed Grindaix nozzles for this purpose. These saturate the grinding wheel bond in a targeted way.
With the dual nozzle technology from Grindaix, centralized lubricoolant supply to one nozzle in the low pressure range (<25bar) achieves cleaning of the grinding process, saturation of the free pore spaces and cooling. This multifunctional Grindaix nozzle is simply positioned above the grinding gap. This minimizes the need for adjustment as the diameter of the grinding wheel decreases. Using our flexible articulated metal tube system (gFlex), this dual nozzle may be mounted simply and flexibly almost anywhere in the machine space.
Here, too, our Grindaix nozzles, including the relevant characteristic curve and the necessary design adjustments to suit your boundary conditions, are all included in the price. Lubricoolant supply achieved by saturating the grinding wheel offers the following benefits:
Grindaix nozzles are suitable for use with both emulsion and oil.
We can find the suitable nozzle solution for all production processes!
This dual nozzle achieves cooling and cleaning rolled into one. Grindaix needle nozzles ensure a high lubricoolant exit speed, so that the lubricoolant enters into the machining zone reliably and provides sufficient cooling. In addition, several lubricoolant high-pressure nozzles are used which avoid loading of the grinding wheel. This leads to improved grinding results on the one hand and to an increase in the service life of the grinding wheel on the other. For optimum positioning of the lubricoolant supply nozzles we recommend our Coolant Pointer
We offer a Grindaix dual nozzle for gear honing. “Dual” means that this nozzle fulfils two tasks. On the one hand, the assembled high-pressure nozzles clean the honing ring with lubricoolant and reliably remove loading chips; on the other, the free pores in the honing ring are saturated with lubricoolant. The lubricoolant is transported via the rotational movement of the honing ring into the machining zone. This nozzle is available for all honing ring geometries and is suitable for operation using a screw spindle pump (40 bar) or a centrifugal pump (20 bar). For mounting we recommend the articulated metal joint system "gFlex" (positional stability and flexibility).
Quick changing systems
Flexible coolant tube "gflex"